A:Bubbles and depressions on the surface of wood-plastic flooring may be caused by problems in the production process, raw materials, or use and maintenance. The following are specific reasons and solutions:
A:Yongte engineer suggest users to check below possible causes and related handling method when the plastic extrusion temperature is not stably
Check the motor circuit and operation, repair or replace the motor; disassemble the reducer, check the gear wear, repair or replace damaged parts; stop the machine to disassemble the screw, clean the barrel and screw, and remove foreign objects; replace the broken belt and adjust the belt tension.
A:In the PVC extrusion process, the burnt problem is relatively common, which will affect the product quality and production efficiency. Here are some ways to avoid the burnt problem of PVC during extrusion
Yongte is professional manufacturer for WPC turn-key production plant. The production process of wood-plastic materials is mainly divided into the following five major steps: wpc material weighting, wpc material mixing, wpc granulation, wpc extrusion and molding, wpc products surface treatment.
A:The service life of wood-plastic materials is generally 10-50 years. However, its actual service life will be affected by many factors,such as material quality, using environment, installation and maintenance
