A:Warping and deformation of wood-plastic WPC door panels is a common quality problem in production. Its causes are complex and usually closely related to formula design, processing technology, equipment performance and cooling and shaping.
A:solving the problem of online embossing requires multiple aspects. Find the root cause and solve it according to the actual production situation. Then you can stably produce high-quality and beautiful WPC decking
A:Bubbles and depressions on the surface of wood-plastic flooring may be caused by problems in the production process, raw materials, or use and maintenance. The following are specific reasons and solutions:
A:Yongte engineer suggest users to check below possible causes and related handling method when the plastic extrusion temperature is not stably
Check the motor circuit and operation, repair or replace the motor; disassemble the reducer, check the gear wear, repair or replace damaged parts; stop the machine to disassemble the screw, clean the barrel and screw, and remove foreign objects; replace the broken belt and adjust the belt tension.
A:In the PVC extrusion process, the burnt problem is relatively common, which will affect the product quality and production efficiency. Here are some ways to avoid the burnt problem of PVC during extrusion
