In the production of wood plastic WPC products, the energy saving is very important for reducing the production cost. Yongte machine is good designed for energy saving, yongte wood miller adopts low power consumption and high capacity grinding system, Yongte mixer machine equip with inverter control for main motor, Yongte WPC extruders equip with inverter control and automatic temperature control system.Yongte WPC machine equip with high effective extrusion system and high speed calibration system to increase the production speed. Yongte provide good WPC production formulation which can ensure high speed and high quality stably production. all these improvements of Yongte WPC machine helps to save 30-50% energy consumption.
It should be noted that the actual service life of rubber nano permeable pipes will also be affected by many factors, such as the use environment (temperature, chemicals, pressure, etc.), whether the installation method is correct, and whether regular maintenance is performed. For example, use under harsh conditions such as high temperature, strong acid and alkali or high wear may shorten its service life. In order to extend the service life of the rubber nano-permeable water pipe, it is recommended to choose products with reliable quality and choose the appropriate material and model according to the specific use environment. At the same time, regular maintenance should be carried out, such as checking whether the pipe is damaged and cleaning the dirt in the pipe in time. This can timely discover and deal with problems, prevent further damage to the pipe, and thus extend its service life.
1. Unstable extrusion volume: It may be due to uneven feeding, such as fluctuations in feeding speed, blockage of feed port, uneven size of raw material particles, etc.; it may also be caused by wear of the extruder screw, unstable screw speed, or uneven barrel heating temperature. 2. Plastic scorching: If the barrel temperature is too high, the screw speed is too fast, the gap between the screw and the barrel is too small, or the material stays in the barrel for too long, it may cause plastic scorching, causing the product to change color, decompose and other problems.
Yonte Plastics Machinery has a strong presence in the field of plastic recycling, offering a wide range of recycling machines. Crusher strong crushing, cleaning machine deep cleaning, extruder precise melting extrusion, granulator fine processing. The equipment cooperate with each other to efficiently recycle waste plastics, contributing to environmental protection and resource recycling.
Yongte wood plastic equipment extruder debugging, first check the power supply, control system and other electrical parts. Then the heating and cooling system temperature, flow rate and other parameters debugging. Recalibrate screw speed and feed speed to ensure smooth material extrusion. Finally, the operation of the mold and the whole machine is checked to make the extruder reach the best state and ensure efficient production.
our company has made a major breakthrough in the field of wood plastic production! After unremitting efforts and careful research and development, we have successfully added waste rubber powder to wood plastic production and successfully completed the trial run.finally we have successed to make rubber wood composite decking with 3D embossed design
