In Europe, the concept of environmental protection has been deeply integrated into all aspects of social development, and the construction industry is particularly eager to pursue sustainable development goals. Against this background, the wood-plastic wallboard market has shown a rapid development trend. According to data released by Mordor Intelligence, the European wood-plastic composite material market has reached approximately 5 billion euros between 2019 and 2023. It is expected that from 2025 to 2030, its scale will grow from 6 billion euros to over 9 billion euros, and continue to expand at a compound annual growth rate of over 7.5%. Yongte Plastic Machinery accurately grasps this market trend, and its carefully built wood-plastic wallboard production line stands out in the European market, showing strong competitiveness and injecting new vitality into the development of the industry.
Yongte Plastic Machinery's wood-plastic wallboard production line has significant advantages and is highly matched with European market demand. During the production process, the production line uses advanced technology to efficiently integrate wood fiber, sawdust and thermoplastic resin, make full use of recycled materials, and produce high-quality wood-plastic wallboards that meet Europe's strict environmental standards. Taking the production of 1 ton of WPC wallboard as an example, 300-400 kg of recycled materials can be effectively utilized, which greatly reduces carbon emissions. In common application scenarios, if a single-family house with an exterior wall area of 200 square meters uses WPC wallboard produced by Yongte Plastics, the carbon footprint during construction will be reduced by about 15% compared with traditional building materials, which is equivalent to reducing carbon dioxide emissions by about 1.2 tons. In terms of product performance, in the anti-corrosion test conducted by an authoritative third-party organization, after simulating harsh outdoor environments for 12 months, the mass loss rate of traditional wood samples reached 15%-20%, and obvious corrosion occurred, while the mass loss rate of the WPC wallboard samples was only 1%-2%, with only slight wear; in the anti-insect experiment, after living with termites for 6 months, the number of holes in traditional wood was 30-40 per square meter on average, while the WPC wallboard was not infested. In terms of weathering resistance, after 5 years of field monitoring, the fading degree of the wallboard is less than 5%, and the dimensional change rate is controlled within 1%, which greatly reduces the maintenance cost. According to statistics, the average maintenance cost of using traditional wood wallboards is about 150-200 euros per square meter in 5 years, while the maintenance cost of using this wood-plastic wallboard is only 20-30 euros per square meter, which is suitable for a variety of environments such as outdoor garden buildings and swimming pools. According to professional testing, the product has good insulation, with a resistance value of 10¹²-10¹³Ω・m; the flame retardant grade reaches B1, the combustion growth rate index (FIGRA) is less than 120W/s, and the total heat release (THR) is less than 15MJ within 600s; in terms of sound insulation, in a 40-decibel noise environment, it can reduce noise by 15-20 decibels, providing a reliable choice for indoor and outdoor decoration.
Yongte Plastic Machinery has made continuous breakthroughs in technological innovation, giving the production line many leading advantages. The intelligent temperature control system developed by the company has a temperature adjustment accuracy of ±0.5℃. It can accurately adjust the temperature in real time according to the material characteristics and process requirements to ensure that the material is plasticized and formed in the best condition. The defective rate of the product is reduced by 15% - 20% compared with the system not used, which improves the stability and consistency of the product. The power transmission system adopts a new high-efficiency and energy-saving motor and an optimized transmission structure. Compared with traditional equipment, the energy utilization rate is increased by 20% - 25%, and the output per unit time is increased by 30% - 40%. By improving the mold structure, using special flow channel design and surface treatment technology, the material flows more evenly during extrusion, and the surface roughness of the product is reduced from Ra6.3μm to Ra3.2μm, reducing material residues, reducing the material loss rate during the production process by 10% - 15%, and reducing production costs. The production line has powerful material compatibility expansion technology. It has successfully achieved stable production of more than 20 different material formulas. It can also incorporate new environmentally friendly additives to further enrich product performance and meet the increasingly diversified needs of the European market. In terms of environmental protection and sustainable development, the production line's processing capacity for recycled materials has been further improved, and it can convert low-quality recycled materials that were originally difficult to use into high-quality wood-plastic wallboard raw materials. The utilization rate of recycled materials has increased by 10% - 15% compared with the past, broadening the application scope of environmentally friendly materials.
Looking to the future, with the continued development of the European construction industry and the growing demand for environmentally friendly building materials, Yongte Plastic Machinery's wood-plastic wallboard production line has broad prospects. The expansion of the European construction industry will bring a broader application space for wood-plastic wallboards, and the exponential growth in demand for environmentally friendly building materials will also provide strong market support for it. Yongte Plastic Machinery plans to further develop a new screw barrel structure based on existing technological breakthroughs, and by optimizing the internal flow channel design to improve the material plasticization efficiency, it is expected to increase the unit time output by another 20% - 25%, while reducing energy consumption by 10% - 15%. In terms of product performance improvement, efforts will be made to overcome the problem of biological durability of wood-plastic wall panels. By adding special antibacterial, anti-mildew and anti-termite functional additives and combining new surface treatment processes, the product's ability to resist algae, mold, fungi and termite erosion will be increased by 30% - 40%, further extending its service life. In addition, Yongte Plastic Machinery will also follow the development trend of intelligent buildings and develop production technology for wood-plastic wall panels with integrated intelligent sensing functions, such as built-in temperature, humidity, light and other sensors in the wall panels to meet the diversified material needs of modern intelligent buildings. Through continuous innovation, Yongte Plastic Machinery will provide the European market with more high-quality wood-plastic wall panel production solutions, help the European environmentally friendly building materials market prosper, and contribute to the sustainable development of Europe while promoting industry progress.
