FAQ
Yongte is professional manufacturer for plastic extrusion machine
What are the reasons for surface defects in wood-plastic products during production?
The reasons for surface defects in wood-plastic products during the production process may be: 1. Raw material quality problems: 2. Improper formula ratio: 3. Improper processing temperature control: 4. Unreasonable extrusion or injection speed: 5. Mold problems: 6. Uneven cooling: 7. Uneven ......
Read More
How to adjust mold water cooling to improve the production quality and speed of wood-plastic products？
through reasonable adjustment of various parameters of mold water cooling, combined with real-time monitoring and analysis of product quality, and continuous optimization and adjustment, the quality of wood-plastic products can be effectively controlled.
Read MoreHow to choose a solenoid valve suitable for plastic extruder?
Choose the solenoid valve of the plastic extruder, to consider the economy, do not ignore the quality. In terms of safety, suitable ones are selected according to the working conditions, such as waterproof, explosion-proof, etc. Reliability Normally closed or normally open depending on working durat......
Read MoreWorking principle of solenoid valve for plastic extruder
The solenoid valve for plastic extruder, when energized, the electromagnetic coil generates an electromagnetic field, attracting or pushing the valve core to change the opening and closing of the channel. Through the sensor monitoring, the control system signals when the parameters are out of range.......
Read More